Shunyata Research

Shunyata Research’s new Reference NR & XC Series v2 power cords were developed using the same materials science and technologies that make the Omega QR the market’s ultimate cost-no-object power cord.

There are many problems with off-the-shelf USB cables including poor quality conductors and dielectrics and insufficient shielding. Conventional cables induce high amounts of signal jitter and phase noise degrading sonic performance.

The Delta USB cabling is an exclusive Shunyata Research product that was designed to achieve reference level performance but at a very reasonable price point. ArNi^® silver conductors and fluorocarbon dielectrics and PMZ construction achieves low levels of jitter and phase noise measurements. Silver-plated copper braided shields protect the delicate signals from external RFI/EMI. Exceptional by design.

Shunyata Research digital cables are produced using a ‌Precision Matched Z (‌‌PMZ) concept. This means that tolerances of the conductor surface, dielectric extrusion, and the precision of the braided shield are held to minute variances. To achieve these tight tolerances, the extrusion and braiding machines must be run at one-quarter speed during the manufacturing process. The result is better performance through a reduction of cable-induced ‘signal jitter’. (Note: Z means impedance)

Shunyata Research digital cables are produced using a ‌Precision Matched Z (‌‌PMZ) concept. This means that tolerances of the conductor surface, dielectric extrusion, and the precision of the braided shield are held to minute variances. To achieve these tight tolerances, the extrusion and braiding machines must be run at one-quarter speed during the manufacturing process. The result is better performance through a reduction of cable-induced ‘signal jitter’. (Note: Z means impedance)

Shunyata Research digital cables are produced using a ‌Precision Matched Z (‌‌PMZ) concept. This means that tolerances of the conductor surface, dielectric extrusion, and the precision of the braided shield are held to minute variances. To achieve these tight tolerances, the extrusion and braiding machines must be run at one-quarter speed during the manufacturing process. The result is better performance through a reduction of cable-induced ‘signal jitter’. (Note: Z means impedance)

‌ΞTRON® is a technology developed by Shunyata Research that prevents dielectric absorption and re-radiation in signal transmission. It requires a special type of conductor that has two signal paths and an electric field compensation circuit that creates a cancellation signal that prevents the insulation from developing a charge. ‌ΞTRON® cables preserve the integrity of the source signal even when using very long runs of cable.
Patent US 8,912,436, Patent Ch ZL201180047344.2.

Shunyata Research digital cables are produced using a ‌Precision Matched Z (‌‌PMZ) concept. This means that tolerances of the conductor surface, dielectric extrusion, and the precision of the braided shield are held to minute variances. To achieve these tight tolerances, the extrusion and braiding machines must be run at one-quarter speed during the manufacturing process. The result is better performance through a reduction of cable-induced ‘signal jitter’. (Note: Z means impedance)

ArNi® is a type of wire created by Shunyata Research designed to be the finest quality wire available for audio purposes. It begins with the highest purity of copper available – OFE C10100 or Ohno (single crystal). Then it is formed in virtual hollow tubes eliminating skin effects and eddy current distortions. In addition, the wire undergoes our proprietary KPIP™ process.

ΞTRON® is a technology developed by Shunyata Research that prevents dielectric absorption and re-radiation in signal transmission. It requires a special type of conductor that has two signal paths and an electric field compensation circuit that creates a cancellation signal that prevents the insulation from developing a charge. ‌ΞTRON® cables preserve the integrity of the source signal even when using very long runs of cable.
Patent US 8,912,436, Patent Ch ZL201180047344.2.

Shunyata Research’s new Reference NR & XC Series v2 power cords were developed using the same materials science and technologies that make the Omega QR the market’s ultimate cost-no-object power cord.

The Denali’s tower form factor is uniquely vertically oriented with a narrow front profile allowing it to be placed alongside an audio rack without taking up valuable shelf space. The close proximity to the audio equipment allows for shorter and tidier AC power cable routing.

The Everest 8000 combines patented innovations from Shunyata Research’s critically acclaimed Hydra Triton and Hydra Typhon designs with transformative technologies developed from its heralded medical division products. From a stunning form-follows-function tower design, to its inside-out engineering, the Everest represents the pinnacle within Shunyata Research’s line of power conditioners.